catalogs

Diameter 1/ Diameter 2 [mm]: 21/71 mm ;
Height [mm]: 92 mm ;
Material: Thermoplast ;
Inner diameter 1 [mm]: 21 mm ;
Inner diameter 2 [mm]: 71 mm ;
ArticleState: Normal

Height [mm]: 94 mm ;
Weight [g]: 120 g ;
Fitting Position: Right ;
Fitting Position: Left ;
Fitting Position: Front Axle ;
Diameter 1 [mm]: 20,5 mm ;
Diameter 2 [mm]: 66,5 mm ;
Material: Elastomer ;
ArticleState: Normal

Inner diameter 1 [mm]: 22 mm ;
Inner diameter 2 [mm]: 74 mm ;
Height [mm]: 100 mm ;
Material: Thermoplast ;
ArticleState: Normal

Inner diameter 1 [mm]: 23 mm ;
Inner diameter 2 [mm]: 80 mm ;
Height [mm]: 90 mm ;
Material: Polychloroprene (Neoprene) ;
Version: FlexBoot ;
Part number of the recommended special tools: 190135 ;
Part number of recommended accessories: 25993 ;
ArticleState: Normal

Length 1/ Length 2 [mm]: 89 to 119 mm ;
Diameter from [mm]: 74 mm ;
Diameter to [mm]: 104 mm ;
for shaft diamater from [mm]: 22 mm ;
to shaft diameter [mm]: 31 mm ;
ArticleState: Normal ;
Technical Information: 1 Achsmanschette, 2 Edelstahlkabelbinder, 60g Sachet CV Fett, Anbauanleitung

Height [mm]: 92 mm ;
Material: Thermoplast ;
Inner diameter 1 [mm]: 21 mm ;
Inner diameter 2 [mm]: 71 mm ;
ArticleState: Normal

Fitting Position: Rear Axle ;
Weight [g]: 22 g ;
Material: Elastomer ;
Fitting Position: Wheel Side ;
ArticleState: Normal

Material: Elastomer ;
Weight [g]: 85 g ;
Fitting Position: Transmission End ;
ArticleState: Normal

Diameter 1/ Diameter 2 [mm]: A=24 / C=74 mm ;
Length [mm]: 98 mm ;
Material: Thermoplast ;
Available as universal article as well, see article no.: QJB8070D ;
ArticleState: in Preparation

Diameter 1/ Diameter 2 [mm]: A=21 / C=66 mm ;
Length [mm]: 92,5 mm ;
Material: Elastomer ;
Joint Type: Tripot Joint ;
ArticleState: No longer supplied by manufacturer

Diameter 1/ Diameter 2 [mm]: A=24 / C=74 mm ;
Length [mm]: 98 mm ;
Material: Thermoplast ;
ArticleState: No longer supplied by manufacturer ;
Installation Information: Die beiliegenden Schellenbänder mit Drehmoment nach Fahrzeugherstellervorgaben fest ziehen

Height [mm]: 100 mm ;
Inner diameter 1 [mm]: 20 mm ;
Inner diameter 2 [mm]: 70 mm ;
ArticleState: Normal ;
Technical Information: Universal- Druckluftboot

Height [mm]: 146 mm ;
Inner diameter 1 [mm]: 22 mm ;
Inner diameter 2 [mm]: 86 mm ;
ArticleState: Normal ;
General Information: Universal boot kit ;
General Information: Bitte beachten: Technik-Info im Anhang (Service Information)